Specifications

  • Manufacturer: Honda
  • Model: Trimmer Attachments UMC435LAC1
  • Type: Trimmers
    • Engine Type: Honda GX35, mini 4-stroke, OHC, single cylinder, air-cooled, multi-position (360°)
    • Honda Engine Model: GX35T
    • Displacement: 35.8 cc (2.18 CID)
    • Bore & Stroke: 39 x 30 mm (1.5 x 1.2 in.)
    • Maximum Net Torque: 1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM
    • Idle Speed: 3,100 ± 200 RPM
    • Max. No-Load RPM: 10,000 RPM
    • Ignition System: Transistorized magneto ignition (electronic)
    • Spark Plug: CMR5H (NGK)
    • Cooling System: Forced air
    • Starting System: Recoil starter
    • Stopping System: Ignition primary circuit ground
    • Carburetor: Diaphragm type w/fuel pump
    • Recommended Fuel: Regular unleaded gasoline (86 Octane or higher)
    • Fuel Capacity: 0.63 L (22.2 fl. Imp. oz.)
    • Clutch Drive Type: Centrifugal Twin Shoe-Clutch
    • Clutch Size: 78 mm (3.0625 in.) Diameter
    • Clutch Engagement: 4;200 ± 200 RPM
    • Air Cleaner: Semi-dry type
    • Lubrication System: Oil mist
    • Oil Capacity: 100 cc (3.52 fl. Imp. oz.)
    • Recommended Oil: SAE 10W30 API service classification SJ or later
    • Overall Length (without attachment): 114.5 cm (45.1 in.)
    • Overall Width: 32.0 cm (12.6 in.)
    • Overall Height: 25.5 cm (10.0 in.)
    • Dry Weight (without attachment): 6.0 kg (13.2 lbs.)
    • Handle Type: Loop
    • Throttle Control Type: Two-motion trigger type
    • Engine Stop Switch: Slide type switch
    • Drive Shaft Type: Rigid Steel
    • Shaft Support: Rubber Mounted Bushings (4)
    • Main Pipe Diameter: 26 mm (1.02 in.)
    • Main Pipe Thickness / Material: 2 mm (0.08 in.) Aluminum
    • Shoulder Harness: Standard
    • Safety Goggles (A.N.S.I Std.): Standard
    • Blade Barrier Kit: Standard