Specifications

  • Manufacturer: Honda
  • Model: Trimmer Attachments UMC425LAC1
  • Type: Trimmers
    • Engine Type: Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
    • Honda Engine Model: GX25T
    • Displacement: 25 cc (1.53 CID)
    • Bore & Stroke: 35 x 26 mm (1.4 x 1 in.)
    • Maximum Net Torque: 1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
    • Idle Speed: 3,100 ± 200 RPM
    • Max. No-Load RPM: 10,000 RPM
    • Ignition System: Transistorized magneto ignition (electronic)
    • Spark Plug: CMR5H (NGK)
    • Cooling System: Forced air
    • Starting System: Recoil starter
    • Stopping System: Ignition primary circuit ground
    • Carburetor: Diaphragm type w/ fuel pump
    • Recommended Fuel: Regular unleaded gasoline (86 Octane or higher)
    • Fuel Capacity: 0.53 L (18.7 fl. Imp. oz.)
    • Clutch Drive Type: Centrifugal Twin Shoe-Clutch
    • Clutch Size: 54 mm (2.125 in.) Diameter
    • Clutch Engagement: 4;200 ± 200 RPM
    • Air Cleaner: Semi-dry type
    • Lubrication System: Oil mist
    • Oil Capacity: 80 cc (2.82 fl. Imp. oz.)
    • Recommended Oil: SAE 10W30 API service classification SJ or later
    • Overall Length (without attachment): 113.5 cm (44.7 in.)
    • Overall Width: 31.5 cm (12.4 in.)
    • Overall Height: 24.5 cm (9.6 in.)
    • Dry Weight (without attachment): 5.1 kg (11.2 lbs.)
    • Handle Type: Loop
    • Throttle Control Type: Two-motion trigger type
    • Engine Stop Switch: Slide type switch
    • Drive Shaft Type: Rigid Steel
    • Shaft Support: Rubber Mounted Bushings (4)
    • Main Pipe Diameter: 24 mm (0.94 in.)
    • Main Pipe Thickness / Material: 2 mm (0.08 in.) Aluminum
    • Shoulder Harness: Standard
    • Safety Goggles (A.N.S.I Std.): Standard
    • Blade Barrier Kit: Standard