Specifications

  • Manufacturer: Honda
  • Model: Brush Cutters HHT35SUKCT
  • Type: Trimmers
    • Engine Type: Honda GX35, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
    • Honda Engine Model: GX35
    • Displacement: 35.8 cc (2.18 CID)
    • Bore & Stroke: 39 X 30 mm (1.5 X 1.2 in.)
    • Maximum Net Torque: 1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM
    • Idle Speed: 3,100 ± 200 RPM
    • Max. No-Load RPM* (Requires Blade Barrier): 10,000 RPM
    • Ignition System: Transistorized flywheel magneto (electronic)
    • Spark Plug: CMR5H (NGK)
    • Cooling System: Forced air
    • Starting System: Recoil starter
    • Stopping System: Ignition primary circuit ground
    • Carburetor: Diaphragm type w/fuel pump
    • Recommended Fuel: Regular unleaded gasoline (87 Octane)
    • Fuel Primer: Anti-flood type
    • Fuel Capacity: 0.65 L (22.9 fl. Imp. oz.)
    • Fuel Consumption (approximate)**: 0.7 L/hr (0.15 Imp. gal./hr)
    • Clutch Drive Type: Centrifugal Twin Shoe-Clutch
    • Clutch Size: 78 mm (3.0625 in.) Diameter
    • Clutch Engagement: 4;200 ± 200 RPM
    • Air Cleaner: Semi-dry type
    • Lubrication System: Oil mist
    • Oil Capacity: 100 cc (3.52 fl. Imp. oz.)
    • Recommended Oil: SAE 10W30 API service classification SJ or later
    • Overall Length With Cutter Mounted: 190.5 cm (75 in.)
    • Overall Width: (handlebars) 60 cm (23.6 in.)
    • Overall Height: 40.5 cm (15.9 in.)
    • Dry Weight (Without Blade): 7 kg (15.4 lbs.)
    • Handle Type: U-shaped (bike type handle)
    • Throttle Control Type: Two-motion trigger type
    • Engine Stop Switch: Slide type switch
    • Cutting Head (Standard): Manual line feed nylon
    • Cutting Head (Optional): Semi-matic, pro-tap, semi-pro
    • Cutting Width: 43.2 cm (17 in.)
    • Line Type: Quiet LineTM
    • Cutting Line Diameter: 2.41 mm (0.095 in.) or 2.67 mm (0.105 in.)
    • Anti-Vibration System: Standard
    • Drive Shaft Type: Flexible steel cable
    • Final Drive Gear Case: Helical cut bevel gears / Sealed ball bearings
    • Gear Ratio: 1.235 Input shaft: 1 (Output Shaft)
    • Main Pipe Diameter: 25.4 mm (1 in.)
    • Main Pipe Thickness / Material: 1.5 mm (0.06 in.) / Aluminum
    • Trimmer Guard With Cutter: Standard
    • Steel Blade Guard: Standard
    • Shoulder Harness: n/a
    • Professional Double Loop Harness: Standard
    • Safety Goggles (A.N.S.I Std.): Standard